Olympus 1040 User Guide
35
EN
Make the settings for the functions while referring to “Using the Menu” (p. 3).
Setting the date and time [
X]
S SETUP X X
“Setting the date and time” (p. 13)
To select the date and time display
order
order
1
Press
D
after setting Minute, and use
CE
to select the date display order.
Selecting the video signal system to match your TV [VIDEO OUT]
S SETUP X VIDEO OUT
The TV video signal system varies depending on the countries and regions. Before viewing camera
images on your TV, select the video output according to your TV’s video signal type.
Submenu 2
Application
NTSC
Connecting the camera to a TV in North America, Taiwan, Korea, Japan, and so on
PAL
Connecting the camera to a TV in European countries, China, and so on
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV
1
Connect the TV and camera.
2
Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
[PAL]).
3
Turn on the TV, and change “INPUT” to “VIDEO (an input jack connected to the camera).”
For details on changing the input source of the TV, refer to the TV’s instruction manual.
4
Press the
q button, and use
CEFD
to select the image for playback.
Depending on the TV’s settings, the displayed images and information may become cropped.
Adjusting the brightness of the monitor
[s]
[s]
S SETUP X s
To adjust the monitor brightness
1
Use
CE
to adjust the brightness while
viewing the screen, and then press the x
button.
button.
s
SET
OK
MENU
BACK
2008
10 26 12 30
X
Y
M
Y M D
D TIME
MENU
CANCEL
Date order
Multi-connector
AV cable (supplied)
Connector cover
Open the connector cover
in the direction of the arrow.
Open the connector cover
in the direction of the arrow.
Connect to the TV
video input jack (yellow)
and audio input jack
(white).
video input jack (yellow)
and audio input jack
(white).
d4377_e_oima_000_book_cs2e.indb 35
d4377_e_oima_000_book_cs2e.indb 35
7/1/2008 12:09:06 PM
7/1/2008 12:09:06 PM