TOA a-9060dh User Guide
87
11.3. Setting the Scene Memory to be Recalled at Power-On
S C E N E S E T T I N G S A V E
S C E N E S E T T I N G P – O N
S C E N E S E T T I N G P – O N
P O W E R O N L A S T
P O W E R O N 0 1
S C E N E
0 1
1
S C E N E
–
0 1
1
S C E N E
–
MEMORY
6
ENTER
3
ESC/BACK
5
MEMORY
1
PARAMETER
2
Press for over 2 seconds.
PARAMETER
4
Step 1. Hold down the Memory key for 2 seconds or more.
The Scene memory setting screen is displayed.
Step 2. Use the Parameter setting knob to display "P-ON"
indication.
Step 3. Press the Enter key to display the setting screen for
the Scene memory to be recalled at Power-On.
Step 4. Select with the Parameter setting knob the Scene
memory bank number (01 – 32) or LASTSCENE to be
read at power-on.
read at power-on.
Notes
• When LASTSCENE is selected, the Scene memory
• When LASTSCENE is selected, the Scene memory
recalled last before power-off is automatically
recalled when power is turned on.
recalled when power is turned on.
• To retain the set parameters, be sure to save them
in the Scene memory. Unless otherwise saved, all
the set parameters are abandoned when the AC
power supply is shut off.
the set parameters are abandoned when the AC
power supply is shut off.
Step 5. Press the Escape/Back key to perform setting that the
designated Scene memory bank number is read at
power-on.
power-on.
Step 6. Press the Memory key.
The display returns to the normal use state.