Epson 1000 Reference Guide

Be careful when inserting a card. You can damage it by

inserting it the wrong way or by using too much force.

Always turn the printer off before you insert or remove a

card.

Always remove the card before you remove the controller

board.

You can insert an identity card into slot A only.

1. If you use an identity card, turn off the printer. If you use a

font card, set the printer off line. (If the FEED light is on,

press FEED to print out any data before you insert the card.)

2. Hold the card so that the arrow is on top and points toward

the slot.

3. Gently slide the card into the slot until it is flush with the

front of the printer.