Epson 1810P Product Datasheet

PowerLite 1810p/1815p

3/07

PowerLite 1810p/1815p 

- 

13

3. Make sure Location is set to 

Automatic

.

4. Select 

Network Port Configurations

 in the Show pull-

down menu.

5. Under Port Configurations, select 

AirPort

.

6. Click 

Apply Now

. Then close the window.

7. Click the AirPort icon on the menu bar at the top of the Mac 

desktop. You see the AirPort status menu:

8. Check to make sure AirPort is turned on.

9. Select your projector’s ESSID.

Note: If you don’t need the other network port configurations, disable 
them by deselecting their checkboxes.

Now you’re ready to connect to the projector. See “Projecting 
Over a Network” on page 17. 

To use Access Point (infrastructure) mode, first adjust your 
projector and wireless access point or AirPort base station 
settings as described in this section. 

1. Press the 

Menu

 button, then choose 

Network

 and press 

Enter

. 

2. Choose 

Network Configuration

 and press 

Enter

.

3. Choose 

Wireless LAN 

and press 

Enter

. You see this screen:

4. Make sure 

Advanced 

is selected for the Connection mode. 

If not, use the 

pointer button on the remote control to 

highlight 

Advanced

, then press 

Enter

 to select it. 

5. If your network is using 802.11a, use the 

pointer button 

on the remote control to highlight 

802.11a

, then press 

Enter

 

to select it. 

6. To enable your computer to find the projector on the 

network, you need to enter the SSID name of your access 
point or AirPort network in the 

ESSID

 text box. (The name 

of your AirPort network may be different from that of your 
AirPort base station; select your base station in the AirPort 
Admin utility and click 

Configure

 to check the name of 

your network.) 

Highlight the 

ESSID

 text box, press 

Enter

, and enter a 

name. Note that the ESSID is case-sensitive (if you enter the 
name in uppercase on the projector, you must type it the 
same way on the computer connecting to the projector).

Use the 

pointer button to select individual letters; then 

press 

Enter

 to input a character. To add a blank space or to 

navigate backward and forward through the input text, 
highlight the arrows and press 

Enter

. To toggle symbol 

settings or capital letters, highlight the option and press 

Enter

. When you’re done, highlight 

Finish

 and press 

Enter

.

7. If your access point assigns IP addresses automatically, turn 

on 

DHCP

. Otherwise, turn off DHCP and enter the 

following information: 

Select 
Automatic 

then select 
AirPort

Select
Network Port 
Configurations 

Choose the ESSID 
you assigned to the 
projector