Epson 1810P Produit Fiche De Donnée
PowerLite 1810p/1815p
3/07
PowerLite 1810p/1815p
-
13
3. Make sure Location is set to
Automatic
.
4. Select
Network Port Configurations
in the Show pull-
down menu.
5. Under Port Configurations, select
AirPort
.
6. Click
Apply Now
. Then close the window.
7. Click the AirPort icon on the menu bar at the top of the Mac
desktop. You see the AirPort status menu:
8. Check to make sure AirPort is turned on.
9. Select your projector’s ESSID.
Note: If you don’t need the other network port configurations, disable
them by deselecting their checkboxes.
them by deselecting their checkboxes.
Now you’re ready to connect to the projector. See “Projecting
Over a Network” on page 17.
Over a Network” on page 17.
Using Access Point Mode
To use Access Point (infrastructure) mode, first adjust your
projector and wireless access point or AirPort base station
settings as described in this section.
projector and wireless access point or AirPort base station
settings as described in this section.
Configuring the Projector
1. Press the
Menu
button, then choose
Network
and press
Enter
.
2. Choose
Network Configuration
and press
Enter
.
3. Choose
Wireless LAN
and press
Enter
. You see this screen:
4. Make sure
Advanced
is selected for the Connection mode.
If not, use the
pointer button on the remote control to
highlight
Advanced
, then press
Enter
to select it.
5. If your network is using 802.11a, use the
pointer button
on the remote control to highlight
802.11a
, then press
Enter
to select it.
6. To enable your computer to find the projector on the
network, you need to enter the SSID name of your access
point or AirPort network in the
point or AirPort network in the
ESSID
text box. (The name
of your AirPort network may be different from that of your
AirPort base station; select your base station in the AirPort
Admin utility and click
AirPort base station; select your base station in the AirPort
Admin utility and click
Configure
to check the name of
your network.)
Highlight the
ESSID
text box, press
Enter
, and enter a
name. Note that the ESSID is case-sensitive (if you enter the
name in uppercase on the projector, you must type it the
same way on the computer connecting to the projector).
name in uppercase on the projector, you must type it the
same way on the computer connecting to the projector).
Use the
pointer button to select individual letters; then
press
Enter
to input a character. To add a blank space or to
navigate backward and forward through the input text,
highlight the arrows and press
highlight the arrows and press
Enter
. To toggle symbol
settings or capital letters, highlight the option and press
Enter
. When you’re done, highlight
Finish
and press
Enter
.
7. If your access point assigns IP addresses automatically, turn
on
DHCP
. Otherwise, turn off DHCP and enter the
following information:
Select
Automatic
Automatic
then select
AirPort
AirPort
Select
Network Port
Configurations
Network Port
Configurations
Choose the ESSID
you assigned to the
projector
you assigned to the
projector