Lexmark Pro715 User Guide

Click 

, or click Start and then click Run.

In the Start Search or Run box, type devmgmt.msc.

Press Enter, or click OK.

The Device Manager opens.

Click the plus sign (+) beside Universal Serial Bus controllers.

If USB Host Controller and USB Root Hub are listed, then the USB port is enabled.

For more information, see the computer documentation.

Try any of the following:

Check the ink cartridges.

Open the printer, and then remove and reinstall the ink cartridges.

Load a plain and unmarked A4

‑ or letter‑size paper.

The printer will read any markings on used paper, which could cause the alignment error message to
reappear.

Close the printer.

Touch OK or press 

 to retry, depending on your printer model.

Press 

 to clear the message.

Try one or more of the following:

Press 

 to continue printing the pages that were saved in the printer memory, and then collate the remainder

of the print job.

Press 

 to cancel the current print job.

Try one or more of the following:

Select the paper tray with the correct paper size or type.

Press 

 to continue printing after loading the correct paper size and paper type in the default paper tray.

Press 

 to cancel the current job.

Troubleshooting