Lexmark Pro715 User Guide
4
Set the color, quality, original image size, and the other scan options. If necessary, press
each time you make
a selection.
5
Press
.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
been saved.
Scanning to a network computer
1
Load the original document.
2
From the printer control panel, navigate to:
> Scan >
> Computer
3
Press the left or right arrow button to manually select the name of the destination computer, and then press
.
Notes:
•
You may be prompted to enter a PIN if the computer requires it.
•
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
your operating system.
4
Select the output file type you want to create and other scan options. If necessary, press
each time you make
a selection.
5
Press
.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
been saved.
Scanning to a flash drive or memory card
Notes:
•
Some features are available only in select models.
•
Before you begin, make sure your flash drive or memory card is not write
‑protected.
1
Load the original document.
2
From the printer control panel navigate to:
> Scan >
> Memory Device >
3
Insert the flash drive or memory card.
Notes:
•
The printer reads only one memory device at a time.
•
If a flash drive is inserted into the USB port while a memory card is in the card slot, then a message appears
on the display prompting you to select which memory device to use.
on the display prompting you to select which memory device to use.
4
Press the up or down arrow button to scroll to the file type you want to scan.
Scanning
65