Lexmark Pro715 User Guide

Choose a fax quality that best suits the capacity of the receiving fax machine and the quality of the original
document.

Standard

200 x 100

200 x 200

Fine

200 x 200

200 x 200

Superfine

300 x 300

200 x 200

Ultrafine

300 x 300 (half

‑toned)

200 x 200

When sending a fax, after entering the fax number, press the arrow buttons to select a fax quality, and then
press 

.

From the printer control panel, navigate to:

 > Fax

Enter the fax number of the recipient, or press Address Book to select a number from the Speed Dial or Group
Dial list.

Press the arrow buttons to scroll to Schedule Fax.

Enter the time you want to send the fax, and then press 

.

Press 

 to start scanning the document and to save the scheduled fax.

The printer sends the fax at the designated time. Do not turn off the printer or unplug it from the telephone line
before the scheduled time.

Press Dial tone.

You should hear the dial tone of the telephone line.

Enter the calling card information, and then when you are connected to the telephone carrier, follow the
prompts.

When prompted, enter the fax number of the recipient, and then press 

.

You can set the printer to print a confirmation page, or transmission report, every time you send a fax. This report
includes the date and time that the fax was sent. If the fax job is unsuccessful, then the report also includes the
cause of the error.

From the printer control panel, navigate to:

 > Setup > 

 > Fax Setup > 

 > Reports > 

 > Transmission Log Printing > 

Press the arrow buttons to select a report printing option:

If you want to print a report every time you send a fax, then select For All.

If you want to save on ink and print a report only when a fax job is unsuccessful, then select On Error.

Faxing