Lexmark X860de 3 User Guide

Off
On
Auto

Temporarily stores jobs on the printer hard disk before printing
Notes:

Off is the factory default setting.

The On setting buffers jobs on the printer hard disk.

The Auto setting buffers print jobs only if the printer is busy processing data

from another input port.

Changing this setting from the printer control panel and then exiting the menus

causes the printer to restart. The menu selection is updated.

Auto
Off
On

Sets the printer to process Macintosh binary PostScript print jobs
Notes:

Auto is the factory default setting.

The Off setting filters print jobs using the standard protocol.

The On setting processes raw binary PostScript print jobs.

ENA Address
ENA Netmask
ENA Gateway

Sets the network address, netmask, or gateway information for an external print

server that is attached to the printer using a USB cable.
Note: This menu item is available only if the printer is attached to an external print

server through the USB port.

This menu is available from the Network/Ports menu:
Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª Reports or

Prints a report containing information about the current network setup
Notes:

The Setup Page contains information about the network printer settings, such as

the TCP/IP address.

The NetWare Setup Page menu item appears only on models that support NetWare

and shows information about NetWare settings.

This menu is available from the Network/Ports menu:
Network/Ports ª Standard Network or Network <x> ª Std Network Setup or Net <x> Setup ª Network Card

Connected
Disconnected

Lets you view the connection status of the Network Card

Lets you view the speed of a currently active network card

Understanding printer menus