Lexmark X860de 3 User Guide

Make sure the paper type setting matches the paper loaded in the tray:

From the printer control panel Paper menu, check the Paper Type setting.

Before sending the job to print, specify the correct type setting:

For Windows users, specify the type from Print Properties.

For Macintosh users, specify the type from the Print dialog.

Replace the toner cartridge.

These are possible solutions. Try one or more of the following:

The Toner Darkness setting is too light, the Brightness setting is too light, or the Contrast setting is too low.

Change these settings from the printer control panel Quality menu.

For Windows users, change these settings from Print Properties.

For Macintosh users, change these settings from the Print dialog and pop-up menus.

Load paper from a fresh package.

Store paper in its original wrapper until you use it.

Avoid textured paper with rough finishes.

Make sure the paper type setting matches the paper loaded in the tray:

From the printer control panel Paper menu, check the Paper Type setting.

Before sending the job to print, specify the correct type setting:

For Windows users, specify the type from Print Properties.

For Macintosh users, specify the type from the Print dialog.

Troubleshooting