Globalsat tr-102 Information Guide

 

3

Even in GPRS mode with answer off, the TR-102 rings twice?

This is a normal situation. When TR-102 receives an incoming call, it will ring 

twice before it hangs up.

It doesn’t seem to memorize the PIN code like the first firmware of the TR-101?

Please use your cell phone to activate the pin code function, and then use 

CallCenter program to setup the pin code. After the setup is successful, 

CallCenter will write the pin code into TR-102. When you restart TR-102, it will 

automatically enter the pin code.

(GPRS)

So after verifying my settings I called the TR-102 set to GPRS mode and it rang, so I was 

expecting it to communicate with the call center set up on my server and listening on port 5000, 

but the screen remains blank over there, is there anything else I need to set up on the server to 

start tracking the TR-102? Not sure how I could send additional settings since I am not seeing it 

in the list, or can these settings be sent via USB maybe? I’m not sure what the TR-101 is doing 

as there is no red light as on the TR-101 when it sends SMS messages, maybe it is a sign that it 

is not getting a GPRS line? 

1.  Please make sure your SIM card supports GPRS function. You can use 

your mobile phone to try this. If you don’t know whether your SIM supports 

GPRS or not, please consult with your SIM card provider or Network 

Service Provider. 

2.  For using the GPRS you need to trigger it either by a call or a SMS. If you 

want to trigger it by a call, please set “Answer mode” to “off”. If you want to 

trigger it by a SMS, please set “Answer mode” to “on”. 

3.  Please make sure these parameters are correctly set: Setup--> GPRS --> 

Parameter1 --> GPRS port :5000, GPRS apn etc....    These setting 

parameters are provided by Network Service Provider.    Or you can check 

this web site : http://www.opera.com/products/mobile/docs/connect/  for 

the APN setting.    Please see “what-is-APN.pdf”. 

4. Start 

the 

CallCenter 

program, Callcenter --> GPRS --> Start --> 5000 --> 

ok. 

5.  Make sure your TR-102 has been connected to your server PC and do the 

setting by CallCenter program. In another word, your TR-102 is registered 

in the CallCenter program. You can check this in CallCenter program by 

click on menu bar [Management] > [User Information] to find out whether 

your TR-102 is in the list. 

6.  Make sure your CallCenter Server PC has a “fixed” IP address. If your 

system has the firewall installed or it uses the Router, please ask system