Lexmark X7675 User Guide

Right-click the printer, and then select Properties from the menu.

Click the Ports tab.

Locate the selected port. The selected port has a check beside it in the Port column.

If the Description column of the selected port indicates that it is a USB port, scroll through the list and select
the port with Printer Port in the Description column.

Click OK, and then try to print again.

When the Wi-Fi indicator light is blinking orange, it indicates that the printer has been set up for wireless networking
but cannot connect to the network for which it has been configured. The printer may be unable to join the network
because of interference, its distance from the wireless access point (wireless router), or until its settings are changed.

These are possible solutions. Try one or more of the following:

Check the access point and, if necessary, turn it on.

There may be temporary interference from other devices such as microwave ovens or other appliances, cordless
phones, baby monitors, and security system cameras. Make sure your access point is not positioned too closely to
these devices.

Antennas usually work best if they are pointing straight up. You may find that reception improves if you experiment
with different angles for the printer and/or wireless access point antennas.

Move the printer closer to the access point. Although the possible distance between devices in 802.11b or 802.11g
networks is 300 feet, the maximum range for optimal performance is generally 100–150 feet.

You can find the signal strength of the network on the network setup page.

A valid WEP key is:

Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, and symbols found on a keyboard.

Troubleshooting