Navitar 10k User Guide
11
Display Functions
Display Functions
On Button
When you plug-in the SUPERNOVA 10K the LED for stand-by will light up. After
pressing the On-button, the lamp will ignite and the whole unit will start to operate.
When you plug-in the SUPERNOVA 10K the LED for stand-by will light up. After
pressing the On-button, the lamp will ignite and the whole unit will start to operate.
Off Button
When you press the off-button, the lamp will turn off and the cooling period will
start. It will last approximately 3 minutes before returning to stand-by mode.
When you press the off-button, the lamp will turn off and the cooling period will
start. It will last approximately 3 minutes before returning to stand-by mode.
Tray +
By pressing this button, the tray will advance. By pressing forward and backward
simultaneously, the projector will go rapidly to the zero-position.
By pressing this button, the tray will advance. By pressing forward and backward
simultaneously, the projector will go rapidly to the zero-position.
Tray -
By pressing this button the tray will go backwards. By pressing backward and
forward simultaneously, the projector will go rapidly to the zero-position.
By pressing this button the tray will go backwards. By pressing backward and
forward simultaneously, the projector will go rapidly to the zero-position.
No-lamp Mode
By pressing this button the unit will go into the no-lamp mode. In this mode,
everything in the SUPERNOVA 10K will work, except the lamp. This means you
can bring the tray back to "0" without igniting the lamp and without waiting for the
after-cooling period. All other functions will still work. This can be useful when
programming with Crestron or AMX and you need to test if everything works.
By pressing this button the unit will go into the no-lamp mode. In this mode,
everything in the SUPERNOVA 10K will work, except the lamp. This means you
can bring the tray back to "0" without igniting the lamp and without waiting for the
after-cooling period. All other functions will still work. This can be useful when
programming with Crestron or AMX and you need to test if everything works.
Manual Focus
To correct the focus manually, press and hold the focus button, then use the plus
and minus buttons to bring the slide into the best focus position. This function can
also be used with a hand remote control.
To correct the focus manually, press and hold the focus button, then use the plus
and minus buttons to bring the slide into the best focus position. This function can
also be used with a hand remote control.