Navitar 10k User Guide
12
Display Functions
Auto Focus
To activate the auto focus, simply press the focus button for a short moment.
During the auto focus mode a LED will come up. To switch it off just press the
button again.
To activate the auto focus, simply press the focus button for a short moment.
During the auto focus mode a LED will come up. To switch it off just press the
button again.
This function can also be done with a hand remote control. If the auto focus
function is on, you can also use the manual correction. This overdrive function is
indicated with a blink on the focus LED.
function is on, you can also use the manual correction. This overdrive function is
indicated with a blink on the focus LED.
Remote Control Connector
Timer
The SUPERNOVA 10K has a timer included to forward the slides. It is program-
mable between 2 and 99 seconds.
The SUPERNOVA 10K has a timer included to forward the slides. It is program-
mable between 2 and 99 seconds.
Programming the Interval Between the Slides
Press the timer button for at least 2 seconds and hold it for the desired interval
(the red LED flashes for every second, for example, 8 flashes equals 8 sec-
onds). If you have reached your desired time, stop pressing the button. Now, the
timer is programmed.
Press the timer button for at least 2 seconds and hold it for the desired interval
(the red LED flashes for every second, for example, 8 flashes equals 8 sec-
onds). If you have reached your desired time, stop pressing the button. Now, the
timer is programmed.
Activating the Timer
Simply press the timer button for a short moment and the cycle will start non-
stop. The set time interval will remain in the projector’s memory even if the
projector is turned off.
Simply press the timer button for a short moment and the cycle will start non-
stop. The set time interval will remain in the projector’s memory even if the
projector is turned off.
Autoshow
The SUPERNOVA 10K includes an autoshow feature which is a useful tool when
using the timer to advance slides.
The SUPERNOVA 10K includes an autoshow feature which is a useful tool when
using the timer to advance slides.
When using autoshow, the timer starts at slide 1 and advances the tray forward.
Autoshow recognizes if a slide is in the gate. If there is a break of 2 empty slide
slots, autoshow will initiate a rapid homing and the cycle will start again with the
next available slide.
Autoshow recognizes if a slide is in the gate. If there is a break of 2 empty slide
slots, autoshow will initiate a rapid homing and the cycle will start again with the
next available slide.
Remote Start
With a simple permanent closure contact connecting pin 9 and 5, the lamp will
ignite and the SUPERNOVA 10K will start operating.
With a simple permanent closure contact connecting pin 9 and 5, the lamp will
ignite and the SUPERNOVA 10K will start operating.
After disconnecting pin 9 and 5, the unit will switch off the lamp and a 3 minute
after-cooling period will follow. After that time it will return to stand-by mode.
after-cooling period will follow. After that time it will return to stand-by mode.