Gateway fx6800 Reference Guide
CHAPTER 1: Upgrading Your Computer
58
7
If you are replacing a drive, reconnect the drive cables
using your notes from
using your notes from
. If you are installing a new
drive, follow the manufacturer’s instructions for
connecting it to the system board.
connecting it to the system board.
You can also refer to the following figure:
8
Replace the side panel by following the instructions in
.
9
Reconnect all external cables and the power cord.
10
Turn on your computer.
11
If you installed a new drive, format and partition the
drive according to the manufacturer’s instructions
(available on the manufacturer’s Web site).
drive according to the manufacturer’s instructions
(available on the manufacturer’s Web site).
12
Install Windows using the operating system DVD that
came with your computer. For more information on
restoring your system, see
came with your computer. For more information on
restoring your system, see
SATA 0 port
SATA 1 port
SATA 2 port
SATA 3 port
SATA 1 port
SATA 2 port
SATA 3 port
8511858.book Page 58 Monday, December 18, 2006 10:51 AM