Sony fwd-50px3 Operating Guide

 GB

If there is no signal currently being input, none of the “Screen” settings options, except for “PAP Setting” and “Multi Display” can 
be selected.

When input is switched to PC input source, the 
“Screen” settings specific for PC input are applied.
The “Screen” settings for a PC include the following 
options:

See “PAP Setting” for video input (page 24).

See “Multi Display” for video input (page 25).

“Full 1”: Select to enlarge the picture to fill the display area in the vertical direction, 
keeping its original horizontal-to-vertical aspect ratio. A black frame will appear on 
the surrounding of the picture.
“Full 2”: Select to enlarge the picture to fill the display area.
“Real”: Select to display the picture in its original number of dots.

You cannot set the “Aspect” while using the “PAP” function or the “Multi Display” 
function.

“Auto Adjustment”: Select “OK” to automatically adjust the display position and 
phase of the picture when the display receives an input signal from the connected PC.
Note that “Auto Adjustment” may not work well with certain input signals. In such 
cases, manually adjust the options below.
“Phase”: Select to adjust the phase when the screen flickers.
“Pitch”: Select to adjust the pitch when the picture has unwanted vertical stripes.
“H Size”: Allows you to adjust the size of the picture horizontally. Press 

G/g and 

press 

 to choose a correction.

“H Shift”: Allows you to move the position of the picture left and right in the 
window. Press 

G/g and press 

 to choose a correction.

“V Size”: Allows you to adjust the size of the picture vertically. Press 

F/f and press 

 to choose a correction.

“V Shift”: Allows you to move the position of the picture up and down in the 
window. Press 

F/f and press 

 to choose a correction.

“Reset”: Resets all settings of “Adjust Screen” to default settings.