Sony fwd-50px3 Operating Guide

 GB

To highlight an option and to change settings, press 

F

/

f

/

G

/

g

.

Press 

 to confirm the selection.

The “Setup” settings include the following options:

Select to display all on-screen settings in your language of choice: “English”, 
“Français”, “Deutsch”, “Español”, “Italiano” or “

”.

You can adjust time, display the built-in clock, or set the timer to make the display
power on/off at a predetermined time.
“Clock Set”: Sets the day of the week and the hour of the day.
“Clock Display”: Displays the currently set time on the screen when set to “On”.
“On/Off Timer”: Sets the time at which the power is automatically turned on or off.

If the built-in clock tends to lose time, the internal battery may be exhausted. Please 
contact your authorized Sony dealer to have the battery replaced.

“Off”: Select to view picture without the benefit of power saving.
“Low”/“High”: Select to change brightness and reduce power consumption.

“On” makes input signal and “Aspect” information appear on the screen for about 20 
seconds when the display is turned on, and the input signal information appear for 
about 5 seconds when the input signal is switched, while “Off” disables display of 
status information.

You can display the input signal and “Aspect” information by using DISPLAY on the remote 
control regardless of the “Status Display” setting.

“On”: Enables sound to be emitted from the speakers.
“Off”: Disables sound to be emitted from the speakers.

When “Speaker Out” is set to “Off”, “Sound Mode” and “Sound Mode Adjust.” 
cannot be selected.