Sony klv-s19a10 Operating Guide
Using the Settings
61
Usi
ng the
Sett
ings
KLV-S19A10/KLV-S23A10/KLV-S26A10/KLV-S32A10
2-589-826-13(1)
G:\SONY\03 TV\834494S KLV-S19-
32A10_EN\0601_EN\2589826131\2589826131 KLVS19-
32A10_US\01US07MEN.fm
32A10_EN\0601_EN\2589826131\2589826131 KLVS19-
32A10_US\01US07MEN.fm
masterpage:3 columns Right
Label Video
Inputs
Inputs
Allows you to identify A/V equipment you connected to the TV,
such as a VCR, DVD, etc. For example, if you have a DVD
player connected to the VIDEO 4 jack, you can select the label
such as a VCR, DVD, etc. For example, if you have a DVD
player connected to the VIDEO 4 jack, you can select the label
DVD
for the VIDEO 4 input. Then when you press
TV/VIDEO
to change inputs, the Video Label you assigned to that input
appears on screen.
appears on screen.
1
Press
V/v
to highlight the video input (VIDEO 1-6) to
which you want to assign a label. Then press
to
select the input.
2
Press
V/v
to highlight one of the displayed labels. Then
press
to select the label.
You can select from the following labels for each input:
Video 1-3
Video 1-3, VHS, DVD, Receiver, Satellite,
Cable Box, 8mm, DTV, Game, LD, Beta,
Skip
Cable Box, 8mm, DTV, Game, LD, Beta,
Skip
Video 4-5
Video 4-5, DVD, Satellite, Cable Box, DTV,
HD, Game, PVR, Skip
HD, Game, PVR, Skip
Video 6
Video 6, PC, DVD, HD, Game, Skip
If you select Skip, your TV skips this input when you
press the TV/VIDEO button.
press the TV/VIDEO button.
Language
Select to display all on-screen Settings in your language of
choice: English, Español, Français.
choice: English, Español, Français.
Auto YC
When connecting both VIDEO IN and S VIDEO IN, you can
select the jack from which the TV receives the input signal. The
TV is factory set to receive S VIDEO input signals.
select the jack from which the TV receives the input signal. The
TV is factory set to receive S VIDEO input signals.
1
Press
TV/VIDEO
repeatedly until the desired video input
appears.
2
After selecting the
Auto YC
option, to watch the pictures
input from the S VIDEO input jack:
Press
Press
V/v to select
On
, then press
.
To watch the pictures input from the VIDEO input jack:
Press
Press
V/v to select
Off
, then press
.
3
Press
WEGA GATE
to exit
Settings
.
Power Saving
Standard
Select to view picture without the benefit of
Power Saving
.
Reduced
Select to view picture with reduced power
consumption.
It also enhances the black level.
consumption.
It also enhances the black level.
Picture Off
Select to turn off the picture. Audio stays on
with your selected volume setting.
with your selected volume setting.
Light Sensor
Select
On
to enable the automatic brightness control. The light
sensor measures the room brightness which allows the TV to
automatically adjust the picture brightness based on the picture
settings and the ambient room light conditions.
automatically adjust the picture brightness based on the picture
settings and the ambient room light conditions.
Be sure not to put anything around the sensor, as its
function may be affected.
See page 13 on the sensor.
function may be affected.
See page 13 on the sensor.
Option
Description
z
If you have assigned
Video Labels, you can
access the External Inputs
list on the WEGA GATE
control panel.
Video Labels, you can
access the External Inputs
list on the WEGA GATE
control panel.
z
The Skip label is useful for
inputs to which no
equipment is connected.
inputs to which no
equipment is connected.
z
To change from one
Power Saving option to
another, use POWER
SAVING on the remote
control.
Power Saving option to
another, use POWER
SAVING on the remote
control.
z
In low light ambient the
range of the backlight
control is reduced when
the light sensor is set to
On.
range of the backlight
control is reduced when
the light sensor is set to
On.
01US02WAR-UC.book Page 61 Wednesday, June 1, 2005 4:07 PM