Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. klv-s19a10
  5. Operating Guide

Sony klv-s19a10 Operating Guide

Download
Page of 72
Other Information
63
Othe
r I
n
form
a
tion
KLV-S19A10/KLV-S23A10/KLV-S26A10/KLV-S32A10
2-589-826-13(1)
G:\SONY\03 TV\834494S KLV-S19-
32A10_EN\0601_EN\2589826131\2589826131 KLVS19-
32A10_US\01US08OTH.fm
masterpage:3 columns Right
Only snow and noise appear on 
the screen.
❑
Check if the antenna is broken or bent.
❑
Check if the antenna has reached the end of its serviceable life. (3-5 years in 
normal use, 1-2 years at the seaside.)
Dotted lines or stripes.
❑
Keep the TV away from noise sources such as cars, motorcycles, or hair-
dryers.
No color/Dark picture/Color is 
not correct
❑
Press 
PICTURE
 to select the desired Picture mode (page 33).
❑
Adjust the Picture Mode options in the Video settings (page 48). 
The picture is too bright.
❑
Press 
PICTURE
 to select the desired Picture mode (page 33).
Noisy picture.
❑
Make sure that the antenna is connected using the supplied 75-ohm coaxial 
cable.
❑
Keep the antenna cable away from other connecting cords.
❑
Do not use 300-ohm twin lead cables as interference may occur.
No sound/Noisy sound
Good picture, no sound.
❑
Check the volume control.
❑
Press 
MUTING
 or 
VOL
 + so that “Muting” disappears from the screen 
❑
Disconnect your headphones.
❑
Set 
Speaker
 to 
On
 in the Audio settings (page 50). If it is set to 
Off
, sound 
is not output from the TV’s speakers regardless of the TV’s volume control. 
Audio noise.
❑
Make sure that the antenna is connected using the supplied 75-ohm coaxial 
cable.
❑
Keep the antenna cable away from other connecting cords.
❑
Do not use 300-ohm twin lead cables as interference may occur.
❑
Press 
MTS/SAP
 to select 
Mono
Striped noise during 
playback/recording of a VCR.
❑
This is caused by video head interference. Keep your VCR away from the 
TV.
❑
Leave a space of 30 cm (11 7/8 inches) between your VCR and the TV to 
avoid noise.
❑
Avoid installing your VCR in front of the TV or at the side of the TV.
Cannot operate settings item.
❑
If the option you want to select appears in a pale color, you cannot select it. 
Wide Screen Mode changes 
automatically.
❑
The current Wide Screen Mode setting is automatically replaced with the 
4:3 Default setting when you change the channel or video input, if 
4:3 
Default
 in the Screen settings is set to other than 
Off
. If you want to lock in 
the Wide Screen Mode selected with the 
WIDE
 button, set 
4:3 Default
 to 
Off
 in the Screen settings (page 51). 
Remote control does not operate.
❑
The batteries could be weak. Replace the batteries.
❑
Check the polarity of the batteries.
❑
Press the 
TV (FUNCTION)
 button first for TV operation.
❑
Point the remote control at the remote control sensor of the TV.
❑
Install the TV away from fluorescent lights.
❑
Press 
FUNCTION
 button for corresponding device you want to control.
Problem
Possible Remedies
(Continued)
01US02WAR-UC.book  Page 63  Wednesday, June 1, 2005  4:07 PM