KYOCERA KM-5050 User Guide

Page of 220
Troubleshooting 
6-10
OPERATION GUIDE
Send Error.
Job is canceled. Press 
[End].
####
2101, 2102, 2103, 2201, 2202, 2203, 
3101: The network cable is 
disconnected or the hub that it is 
connected to is not operating 
properly. Check the cable and the 
hub. Otherwise, the server name or 
the host name of the SMTP server is 
not set correctly. Use COMMAND 
CENTER and register the SMTP 
server name and the host name 
correctly.
2204: The E-mail size exceeds the 
acceptable send data capacity. 
Decrease the size or resolution of the 
scanned data to be transmitted and 
resend the E-mail.
5101, 5102, 5103, 5104, 7102, 720f: 
Turn the main power switch off and 
back on. If this error occurs several 
times, make a note of the displayed 
error code and contact your service 
representative.(Refer to the 
corrective action for the error 
message “ An error has occurred.”)
9181: The scanned original exceeds 
the acceptable number of pages of 
999. Send the excess pages 
separately.
Set the folding tray.
Is the folding tray correctly 
installed to the 3,000-sheet 
capacity document finisher?
Install the folding tray correctly to the 
3,000-sheet capacity document 
finisher. For details, refer to the 
Operation Guide of the 3,000-sheet 
capacity document finisher
.
Set the folding unit.
Is the folding unit correctly 
installed to the 3,000-sheet 
capacity document finisher?
Install the folding unit correctly to the 
3,000-sheet capacity document 
finisher. For details, refer to the 
Operation Guide of the 3,000-sheet 
capacity document finisher
.
Set the punch waste 
box.
The punch waste box of the 
document finisher or 3,000-sheet 
capacity document finisher is not 
installed correctly.
Follow the instruction on the touch 
panel to set the punch waste box 
correctly.
Set the waste toner 
box.
The waste toner box is not installed 
correctly. Set it correctly.
Error Message
Checkpoints
Corrective Actions
Reference 
Page