KYOCERA KM-5050 User Guide
Preparation before Use
2-10
OPERATION GUIDE
Configuring a Network (LAN Cable Connection)
The machine comes with a standard network interface and supports each
of TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, allowing network
printing on various platforms such as Windows, Macintosh, UNIX and
NetWare.
of TCP/IP, IPX/SPX, NetBEUI and AppleTalk protocols, allowing network
printing on various platforms such as Windows, Macintosh, UNIX and
NetWare.
Setting TCP/IP (When Using Fixed IP Address)
Follow the steps below to set TCP/IP when a fixed IP address is used.
Make sure that an IP address is available by asking your network
administrator to obtain it in advance.
Make sure that an IP address is available by asking your network
administrator to obtain it in advance.
1
Press the System Menu key.
2
Press [System], [Next] of Network and then [Change] of TCP/IP.
3
Press [On] of TCP/
IP.
IP.
4
Press [Off] of DHCP.
5
Press [IP Address]
and enter the IP
address using the
numeric keys.
and enter the IP
address using the
numeric keys.
System - TCP/IP
Use TCP/IP.
On
Off
Cancel
OK
Status
10/5/2006 10:10
DHCP
On
Off
IP Address
Subnet Mask
Default
Gateway
0.0.0.0
0.0.0.0
0.0.0.0
System - TCP/IP
Use TCP/IP.
On
Off
Cancel
OK
Status
10/5/2006 10:10
DHCP
On
Off
IP Address
Subnet Mask
Default
Gateway
192.168.1.150
0.0.0.0
0.0.0.0