LG 42LA690S User Guide

26

MAGIC REMOTE CONTROL FUNCTIONS

It is necessary to ‘pair’ (register) the magic remote 
control to your TV before it will work.

1 To register automatically, 

turn the TV on and press the 

Wheel(OK) button. When 

registration is completed, the 

completion message appears 

on the screen.

2 If registration fails, turn the TV 

off and back on, then press 

the 

Wheel(OK) button to 

complete registration.

1 Press and hold the 

BACK  

and 

SMART  buttons 

together for 5 seconds to 

reset, then register it by 

following “How to register the 

Magic Remote Control” above.

2 To re-register the Magic 

Remote Control, press and 

hold the 

BACK  button for 5 

seconds toward the TV. When 

registration is completed, the 

completion message appears 

on the screen.

 

1 If the pointer disappears, move 

the Magic Remote Control 

slightly to left or right. Then, it 

will automatically appear on 

the screen.

 

»

If the pointer has not been 

used for a certain period of 

time, it will disappear.

2 You can move the pointer by 

aiming the Pointer Receiver of 

the Magic Remote Control at 

your TV then move it left, right, 

up or down.

 

»

If the pointer does not work 

properly, leave the Magic 

Remote Control for 10 

seconds then use it again.

 

y

Use the Magic Remote Control within the 
maximum communication distance (10 m). 
Using the Magic Remote Control beyond this 
distance, or with an object obstructing it, may 
cause a communication failure.

 

y

A communication failure may occur due to 
nearby devices. Electrical devices such as 
a microwave oven or wireless LAN product 
may cause interference, as these use the 
same bandwidth (2.4 GHz) as the Magic 
Remote Control.

 

y

The Magic Remote Control may be damaged 
or may malfunction if it is dropped or receives 
a heavy impact.

 

y

Take care not to bump into nearby furniture 
or other people when using the Magic 
Remote Control.

 

y

Manufacturer and installer cannot provide 
service related to human safety as the 
applicable wireless device has possibility of 
electric wave interference.

 

y

It is recommended that an Access Point (AP) 
be located more than 1 m away from the 
TV. If the AP is installed closer than 1 m, the 
Magic Remote Control may not perform as 
expected due to frequency interference.

1

If you press 

Wheel(OK) on the Magic 

Remote Control, the following screen 

appears. 

Shows information about the current 

programme and screen.

2

You can select More Menu.

More

11

-1