LG 55LV75A User Guide

Connect the display to a local area network (LAN) 
via the LAN port as shown on the following illustra-
tion and set up the network settings.
Only supports wired network connection.
After making a physical connection, a small 
number of networks may require the display net-
work settings to be adjusted. For most networks, 
the display will connect to automatically without 
any adjustments.
For detail information, contact your internet pro-
vider or router manual.

To set up the network settings: (Even if your dis-
play has already connected automatically, running 
setup again will not harm anything),

1

  Press 

SETTINGS to access the main menus.

2

  Press the navigation buttons to scroll to 

 and press 

.

3

  Press the navigation buttons to select 

 and press 

.

4

  If you already set Network Setting, select 

. The new connection settings resets 

the current network settings. 

5

  Select 

 or 

.

- If selecting 

, press the 

navigation and number buttons. IP addresses 
will need to be input manually.

- 

: Select this if there is a 

DHCP server (Router) on the local area net-
work (LAN) via wired connection, the display 
will automatically be allocated an IP address. 
If you’re using a broadband router or broad-
band modem that has a DHCP (Dynamic 
Host Configuration Protocol) server function. 
The IP address will automatically be deter-
mined.

6

  When you are finished, press 

.

LAN

Router

LAN

WAN

Cable modem

ETHERNET

Internet

Internet

Cable modem

Router

 

y

Network setting menu will not be avail-
able until the display connected to physical 
network.

 

y

Since there are various connection meth-
ods, please follow the specifications of your 
telecommunication carrier or internet service 
provider.

 

y

Do not connect a modular phone cable to 
the LAN port.

 

y

Since there are various connection meth-
ods, please follow the specifications of your 
telecommunication carrier or internet service 
provider.