LG LGD801 Owner's Manual

38

Installing the micro-USIM card

Before you start exploring your new phone, you may choose to insert the micro-USIM 

card.
The eject button is a small round aperture just above the tray door. To install a new 

micro-USIM card:

1  

Insert the micro-USIM ejection tool that comes with the phone (or a thin pin) into 

the eject button aperture, and push gently but firmly until the tray pops out.

2  

Remove the tray and place the micro-USIM card inside it, with the contacts out and 

the angled corner to the right. There is only one possible way to fit the card snugly 

into the tray.

3  

Carefully reposition the tray in the slot and push it gently back into the phone.

NOTE: Make sure the gold contact area on the card is facing downwards.

Eject button aperture

Getting to know your phone