LG LDG5315ST User Guide

20 INSTALLATION

To check ignition of the Bake burner, follow the steps 

below:

Remove all packing materials from inside the 

oven cavity.

Touch 

Bake. 350 °F appears in the display.

Touch 

Start.

It may take between 30 and 90 seconds for the 

burner to start heating.
To check ignition of the Broil burner, follow the steps 

below:

Touch 

Broil. Hi appears in the display.

Make sure the door is closed.

Touch 

Start.

It may take between 30 and 90 seconds for the 

burner to start heating.

Do not try to light either the Bake or Broil burners 

during a power outage. The range has an 

electrical ignition system and cannot be used 

without power.

The range comes from the factory with the air 

shutters adjusted for proper air flow for natural gas.  

If converted to LP, follow the instructions provided in 

the conversion kit to properly adjust the air shutters. 

LP conversion must be performed by a qualified 

technician.

Level the range by adjusting the leveling legs. 

Extending the legs slightly may also make it easier to 

insert the rear leg into the anti-tip bracket.

Use a level to check your adjustments. Place the level 

diagonally on the oven rack, and check each direction 

for level.
First check direction  . 
Then check direction  . If the level doesn’t show level 

on the rack, adjust the leveling legs.

1

2

Anti-tip 

bracket

Leveling leg

Slide the range against the wall, making sure 

the back leg slides into and engages the anti-tip 

bracket.

Check for proper installation by grasping 

the front edge of the cooktop and carefully 

attempting to tilt the range forward.