LG LDG5315ST User Guide

OPERATION

In case of a power failure, you can light the gas 

surface burners on your range with a match.
Surface burners in use when an electrical power 

failure occurs will continue to operate normally.

Hold a lit match to the burner, then push in the 

control knob.

Turn the control knob to the 

Lo position.

Use extreme caution when lighting burners with a 

match. It can cause burns and other damage.

Aluminum

Medium-weight cookware is 

recommended because it heats 

quickly and evenly. Most foods 

brown evenly in an aluminum 

skillet. Use saucepans with tight 

fitting lids when cooking with 

minimum amounts of water.

Cast-Iron

If heated slowly, most skillets will 

give satisfactory results.

Stainless Steel

This metal alone has poor 

heating properties and is usually 

combined with copper, aluminum 

or other metals for improved heat 

distribution. Combination metal 

skillets work satisfactorily if they 

are used with medium heat as the 

manufacturer recommends.

Enamelware

Under some conditions, the 

enamel of this cookware may melt. 

Follow cookware manufacturer’s 

recommendations for cooking 

methods.

Glass

There are two types of glass 

cookware. Those for oven use only 

and those for top-of-range cooking.

Heatproof 

Glass Ceramic

Can be used for either surface or 

oven cooking. It conducts heat very 

slowly and cools very slowly. Check 

cookware manufacturer’s directions 

to be sure it can be used on gas 

ranges.

If using a wok, use a 14-inch or smaller flat-bottomed 

piece of wok. Make sure that the wok bottom sits flat 

on the grate.

Use flat-bottomed 

wok

Do not use a wok support ring. Placing the ring 

over the burner or grate may cause the burner 

to work improperly, resulting in carbon monoxide 

levels above allowable standards. This can be 

hazardous to your health.

Do not place stove-top grills on the burner.

Do not use stove top grills on the surface burners. 

Using a stove top grill on the surface burner will 

cause incomplete combustion and can result 

in exposure to carbon monoxide levels above 

allowable current standards. This can be a health 

hazard.