Viewsonic PJD8653WS User Manual
52
Two images, side-by-side format
`
Select “3D” --> “3D Format” from OSD and choose “Side-by-Side(Half)” for
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 58.
Image does not display in 3D
`
Check if the battery of 3D glasses is drained.
`
Check if the 3D glasses is turned on.
`
Select “3D” --> “3D Format” from OSD and choose “Side-by-Side(Half)” for
input signal is HDMI 1.4a 3D. 3D Format is only supported on 3D Timing on
page 58.
On Screen Messages
y
Power off confirm
Power Off?
Press power key again.
Press power key again.
y
Fan lock error
The projector will switch off automatically.
Warning! FAN LOCKED
y
No source found
VGA-A
No Source Found
y
Out of display range
VGA
Out of display range
y
Over temperature
Warning! TEMPERATURE TOO HIGH
Please:
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.
1. Make sure air in and outlets are not blocked.
2. Make sure the environment temperature is under 40 degree C.