Sony DR-GA500 Manual
8
GB
Connection
Connecting the Headset system
Step 1-: Connecting a 7.1ch Sound Device
1
Connect the processor to the
sound device as illustrated below.
Connecting jacks of the sound
device*
device*
Cable
plug
names
MIC IN
Connect to MIC IN jack
Connect to MIC IN jack
MIC
L/R OUT
Connect to L/R OUT jack
Connect to L/R OUT jack
L / R
Surround L/R OUT
Connect to SL/SR OUT jack
Connect to SL/SR OUT jack
SL / SR
Center/Subwoofer OUT
Connect to C/SW OUT jack
Connect to C/SW OUT jack
C / SW
Surround back L/R OUT
Connect to SBL/SBR OUT jack
Connect to SBL/SBR OUT jack
SBL / SBR
* The jack name varies depending on the sound
device.
Multi-channel cable
(supplied)
Rear panel of processor
2
Slide the INPUT switch to “7.1ch.”
Front panel of
processor
3
Set the 7.1ch speaker mode in the computer.
For details on operation of your computer/sound device, refer to the operating instructions
for it.
Do not connect the USB cable with multi-channel cable at the same time when you connect
the processor to the computer. The computer sound setting may be switched to an
unintended device.
Connection