Sony dvp-ns500v Manual
Hook
ups
31
To enjoy the surround sound effects of this player or your amplifier (receiver), the following
items must be set as described below for the audio connection you selected in pages 22 to 25
(
items must be set as described below for the audio connection you selected in pages 22 to 25
(
through
). Each of these are the default settings and do not need to be adjusted when
you first connect the player. Refer to page 72 for using the Setup Display.
Audio Connection (pages 22 to 25)
No additional settings are needed.
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 77).
•
Set “48kHz/96kHz PCM” to “96kHz/24bit,” only if you connect an amplifier (receiver) that
conforms to the 96 kHz sampling frequency (page 78).
conforms to the 96 kHz sampling frequency (page 78).
•
If the sound distorts even when the volume is turned down, set “AUDIO ATT” to “ON” (page 77).
Enjoying the surround sound effects
Item
You select
Page
DISTANCE
BALANCE
LEVEL
BALANCE
LEVEL
Set according to the connected
speakers
speakers
Item
You select
Page
DOWNMIX
DOLBY SURROUND
DIGITAL OUT
ON
Item
You select
Page
DOWNMIX
DOLBY SURROUND
B
D
A
B-1
B-2
C-2
D-2
C-1
D-1