Sony DSX-M50BT Manual
11
GB
2
Press CALL, rotate the control dial to
select [PAIRING], then press it.
select [PAIRING], then press it.
flashes.
The unit enters pairing standby mode.
3
Perform pairing on the BLUETOOTH
device so it detects this unit.
device so it detects this unit.
4
Select [Sony Automotive] shown in
the display of the BLUETOOTH
device.
the display of the BLUETOOTH
device.
If [Sony Automotive] does not appear,
repeat from step 2.
repeat from step 2.
5
If passkey* input is required on the
BLUETOOTH device, input [0000].
BLUETOOTH device, input [0000].
* Passkey may be called “passcode,” “PIN
code,” “PIN number” or “Password,” etc.,
depending on the device.
depending on the device.
When pairing is made,
stays lit.
6
Select this unit on the BLUETOOTH
device to establish the BLUETOOTH
connection.
device to establish the BLUETOOTH
connection.
or
lights up when the connection is
made.
Note
While connecting to a BLUETOOTH device, this unit
cannot be detected from another device. To enable
detection, enter the pairing mode and search for
this unit from another device.
cannot be detected from another device. To enable
detection, enter the pairing mode and search for
this unit from another device.
To cancel pairing
Perform step 2 to cancel the pairing mode
after this unit and the BLUETOOTH device are
paired.
after this unit and the BLUETOOTH device are
paired.
To use a paired device, connection with this
unit is required. Some paired devices will
connect automatically.
unit is required. Some paired devices will
connect automatically.
1
Press CALL, rotate the control dial to
select [BT SIGNL], then press it.
select [BT SIGNL], then press it.
Make sure that
lights up.
2
Activate the BLUETOOTH function
on the BLUETOOTH device.
on the BLUETOOTH device.
3
Operate the BLUETOOTH device to
connect to this unit.
connect to this unit.
or
lights up.
Icons in the display:
[0000]
Input passkey
Connecting with a paired
BLUETOOTH device
BLUETOOTH device
Lights up when a cellular phone is
connected to the unit.
connected to the unit.
Lights up when an audio device is
connected to the unit.
connected to the unit.