Sony CXS-M2016 Manual

Page of 68
14
Adjusting setup items
1
Press and hold the select button.
The setup display appears.
2
Rotate the control dial until the desired 
item appears, then press it.
3
Rotate the control dial to select the 
setting, then press it.
*
4
Press  
(BACK).
* For CLOCK-ADJ, TUNER-STP and BTM 
settings, step 4 is not necessary.
The following items can be set depending 
on the source and setting:
*1 When the unit is turned off.
*2 When the audio output is set to “SUB-OUT.”
*3 When the SiriusXM source is activated.
Memory backup
Your last settings are stored automatically. 
Sound settings (except volume), setup items 
(except clock, Parental Lock setting and 
passcode) and tuner presets are stored in the 
internal memory of the unit.
CLOCK-ADJ 
(Clock Adjust) (page 6)
TUNER-STP 
(Tuner Step) (page 6)
CT
 (Clock Time)
Activates the CT function: “ON,” “OFF” 
(page 11).
BEEP
Activates the beep sound: “ON,” “OFF.”
CAUT ALM
*
1
 (Caution Alarm)
Activates the caution alarm: “ON,” 
“OFF” (page 7).
AUX-A
*
1
 (AUX Audio)
Activates the AUX source display: “ON,” 
“OFF” (page 15).
AUTO OFF
Shuts off automatically after a desired 
time when the unit is turned off: “NO,” 
“30S (Seconds),” “30M (Minutes),” “60M 
(Minutes).”
REAR/SUB
*
1
Switches the audio output: “REAR-
OUT” (power amplifier), “SUB-OUT” 
(subwoofer).
DEMO
 (Demonstration)
Activates the demonstration: “ON,” 
“OFF.”
DIMMER
Changes the display brightness: “ON,” 
“OFF.”
M.DISPLAY
 (Motion Display)
– “SA”: to show moving patterns and 
spectrum analyzer.
– “OFF”: to deactivate the Motion Display.
AUTO SCR
 (Auto Scroll)
Scrolls long items automatically: “ON,” 
“OFF.”
LPF
*
2
 (Low Pass Filter)
Selects the subwoofer cut-off frequency: 
“OFF,” “80Hz,” “100Hz,” “120Hz,” 
“140Hz,” “160Hz.”
SW PHASE
*
2
 (Subwoofer Phase)
Selects the subwoofer phase: “SUB 
NORM,” “SUB REV.”
HPF
 (High Pass Filter)
Selects the front/rear speaker cut-off 
frequency: “OFF,” “80Hz,” “100Hz,” 
“120Hz,” “140Hz,” “160Hz.”
LOUDNESS
Reinforces bass and treble for clear 
sound at low volume levels: “ON,” 
“OFF.”
PARENTAL
*
3
Sets the parental lock to “ON” or “OFF,” 
and edits the passcode (page 16).
BTM