Sony VPL-HW65ES Manual
GB
18
The ON/STANDBY or WARNING indicator lights up or flashes if there is any trouble with
your projector.
your projector.
When a warning indicator other than the above starts flashing, and the symptom persists even after
carrying out the above methods, consult with qualified Sony personnel.
carrying out the above methods, consult with qualified Sony personnel.
Error Handling
Warning Indicators
Flashing/Lighting indicators
The number of
flashes
flashes
Cause and Remedy
Twice
Close the lamp cover securely, then tighten
the screws securely.
Close the filter holder securely.
the screws securely.
Close the filter holder securely.
Three times
The temperature of lamp is unusually high.
Turn off the power and wait for the lamp to
cool, then turn on the power again.
If the symptom persists, the lamp may be at
the end of its service life. In this case,
replace the lamp with a new one.
Turn off the power and wait for the lamp to
cool, then turn on the power again.
If the symptom persists, the lamp may be at
the end of its service life. In this case,
replace the lamp with a new one.
Twice
The internal temperature is unusually high.
Check to ensure that if nothing is blocking
the ventilation holes or whether or not the
unit is being used at high altitudes.
Check to ensure that if nothing is blocking
the ventilation holes or whether or not the
unit is being used at high altitudes.
Three times
The fan is broken. Consult with qualified
Sony personnel.
Sony personnel.
Note
ON/STANDBY
indicator
indicator
WARNING
indicator
indicator
(Flashes in red)
(Flashes in red)
(Flashes in red)
Both indicators flash
If there is any problem or an error message appears on the
screen, refer to “Troubleshooting” in the Operating
Instructions contained in the supplied CD-ROM.
screen, refer to “Troubleshooting” in the Operating
Instructions contained in the supplied CD-ROM.