Sony VPL-HW65ES Manual
GB
20
• Be sure that the projector is placed on a
stable surface.
3
Loosen the screw on the lamp cover
with a Philips screwdriver, and then
open the lamp cover.
with a Philips screwdriver, and then
open the lamp cover.
4
Loosen the 3 screws on the lamp with
the Phillips screwdriver. Hold up the
handle, then pull the lamp straight out.
the Phillips screwdriver. Hold up the
handle, then pull the lamp straight out.
5
Hold the handle of the new lamp and
push it in securely until it reaches the
end, and then tighten the 3 screws.
push it in securely until it reaches the
end, and then tighten the 3 screws.
Be careful not to touch the optical block
inside the unit.
inside the unit.
6
Close the lamp cover, then tighten the
screws.
screws.
Note