Sony MEX-BT3000P Manual

13

* For SET PAIRING, REDIAL, VOICE DIAL and 

SET BT SIGNL settings, step 3 is not necessary.

The following items can be set:

* Depending on the cellular phone, this unit’s 

ringtone may be output even if set to “2 (cellular 
phone).”

The Bluetooth device (cellular phone, audio 
device, etc.) and this unit need to be 
“paired” before use between each other via 
the Bluetooth function.

• For details on pairing for a Bluetooth device, 

refer to the operating instructions supplied with 
the device.

• You can pair up to 9 Bluetooth devices with this 

unit.

 and rotate the control 

dial until “SET PAIRING” appears, 
then press it.
The unit enters pairing standby mode.

Set the Bluetooth device to search for 
this unit.
A list of detected devices appears in the 
display of the device to be connected. 
This unit is displayed as “Sony 
Automotive” on the device to be 
connected.

If passkey* input is required in the 
display of the device to be connected, 
input “0000.”
If the device supports Bluetooth version 
2.1, passkey input is not required.

* Passkey may be called “passcode,” “PIN 

code,” “PIN number” or “Password,” etc., 
depending on the device.

This unit and the Bluetooth device 
memorize each other’s information, and 
when pairing is made, 

 stays lit.

 (page 17)

*

Selects whether this unit or the 
connected cellular phone outputs the 
ringtone: “1 (this unit)”- “2 (cellular 
phone).”

Sets this unit to answer an incoming call 
automatically: “OFF”-“1 (about 3 
seconds)”-“2 (about 10 seconds).”

 (Set Bluetooth Signal)