Sony MEX-BT3000P Manual
15
cellular phone name appear in the
display.
display.
Icons in the display:
* Turns off without handsfree connection.
Differs in the case of a cellular phone.
Changing display items
Press
Press
.
Connecting the last-connected cellular
phone from this unit
phone from this unit
1
Make sure the Bluetooth signal of the
cellular phone is activated.
cellular phone is activated.
2
Press
repeatedly until “BT
PHONE” appears.
3
Press
(handsfree).
“
” flashes while the connection is
being made, then stays lit while
connected.
connected.
Notes
• Some cellular phones require permission to
access their phonebook data during handsfree
connection to this unit. Obtain permission via
the cellular phone.
connection to this unit. Obtain permission via
the cellular phone.
• While streaming Bluetooth audio, you cannot
connect from this unit to the cellular phone.
Connect from the cellular phone to this unit
instead. A connecting noise may be heard over
playback sound.
Connect from the cellular phone to this unit
instead. A connecting noise may be heard over
playback sound.
Tip
With Bluetooth signal on: when the ignition is
turned to on, this unit reconnects automatically
to the last-connected cellular phone. But
automatic connection also depends on the
cellular phone’s specification. If automatic
connection is not made, connect manually.
turned to on, this unit reconnects automatically
to the last-connected cellular phone. But
automatic connection also depends on the
cellular phone’s specification. If automatic
connection is not made, connect manually.
Connecting an audio device
1
Press
and rotate the control
dial until “SET BT SIGNL” appears,
then press it.
“
then press it.
“
” lights up when Bluetooth signal is
activated.
2
Turn on the audio device and activate
the Bluetooth signal.
the Bluetooth signal.
3
Connect to this unit using the audio
device.
“
device.
“
” appears when the connection is
made.
Connecting the last-connected audio
device from this unit
device from this unit
1
Make sure the Bluetooth signal of the audio
device is activated.
device is activated.
2
Press
repeatedly until “BT
AUDIO” appears.
3
Press
(PAUSE).
“
” flashes while the connection is
being made, then stays lit while
connected.
connected.
Handsfree calling
Once the unit is connected to the cellular
phone, you can make/receive handsfree
calls by operating this unit.
phone, you can make/receive handsfree
calls by operating this unit.
Before handsfree calling, check the
following:
following:
Signal strength status of
connected cellular phone.*
connected cellular phone.*
Remaining battery status of
connected cellular phone.*
connected cellular phone.*