D-Link DMI-128ESU User Manual
D-LINK ISDN TA DMI-128ESU+
33
AT$AOn
Set analog port A voice information
capability in originate mode
capability in originate mode
*0
1
• Select speech
• Select 3.1kHz audio
AT$APn
Dial pause set up for analog port A
*1
2
3
4
3
4
• 5sec
• 9sec
• 11sec
• 13sec
AT$ASn
Screen incoming call for analog port A
0
*1
• Accept incoming call if the calling
party number is in the call screen table.
• Accept all incoming call
party number is in the call screen table.
• Accept all incoming call
AT$BAn
Set analog port B voice information
capability in answer mode
capability in answer mode
0
1
1
*2
• Accept speech
• Accept 3.1kHz audio
• Accept both
AT$BN=x
Set analog port B directory number / sub-
address
(eg. AT$BN=12345678 + 12345)
address
(eg. AT$BN=12345678 + 12345)
x
• x = telephone number
main - address: max 20 digits
main - address: max 20 digits
sub - address: max 5 digits
AT$BOn
Set analog port B voice information
capability in originate mode
capability in originate mode
*0
1
• Select speech
• Select 3.1kHz audio
AT$BPn
Dial pause set up for analog port B
*1
2
3
4
3
4
• 5sec
• 9sec
• 11sec
• 13sec
AT$BSn
Screen incoming call for analog port B
0
*1
• Accept incoming call if the calling
party number is in the call screen table.
• Accept all incoming call
party number is in the call screen table.
• Accept all incoming call
AT$CC
Display advice of accumulate charge
Display advice of accumulate charge (data
port, analog port A, analog port B)
port, analog port A, analog port B)
AT$CD
Display all analog port setting
Display all of the setting for analog port A
and B
and B
AT$CGn
Global call select setting
If the incoming call did not contain the
called party number then TA had to
determine ring mechanism
If the incoming call did not contain the
called party number then TA had to
determine ring mechanism
0
1
1
*2
• Ring TEL-A only
• Ring TEL-B only
• Ring both TEL-A and TEL-B
AT$CIn
Enable inner communication
0
*1
• Disable inner communication
• Enable
AT$CPn
Receiver priority setting
This function only available when
set AT$CG2
This function only available when
set AT$CG2
*1
2
3
3
• Ring TEL-A/B alternatively
• Ring TEL-A 10 times first
• Ring TEL-B 10 times first
AT$CSn
Select supplementary service function
Note: Follow chapter 10.
AT$CZn
Initialize charge
AT$CZn =MM-DD-YY
AT$CZn =MM-DD-YY
1
2
3
2
3
• Initialize TEL-A to zero charge
• Initialize TEL-B to zero charge
• Initialize data port to zero charge
AT$CFn
Call forwarding function select
Select call forwarding by local or
Network.
Select call forwarding by local or
Network.
*1
2
3
4
5
3
4
5
• Local call forwarding
• Network forwarding, ID=32
• Network forwarding, ID=33
• Network forwarding, ID=34
• Network forwarding, ID=35
AT*CFAn
Enable call forwarding for analog port A
*0
1
• No forwarding
• If the incoming call is for TEL-
A, it will forward automatically
to the phone number defined by
to the phone number defined by
AT*CFA=xxxxxx
AT *CFBn
Enable call forwarding for analog port B
*0
1
• No forwarding
• If the incoming call is for TEL-
B, it will forward automatically
to the phone number defined by
to the phone number defined by
AT*CFB=xxxxxx