D-Link DAS-3224_revB Software Guide
錯誤! 尚未定義樣式。
21
Modify and Remove the Connection Status
The ‘wizard modify’ and ‘wizard delete’ command allows you to modify the user connection
administrate status, ATM VC connection identify, ADSL connection profile, and able to remove the
Subscriber and Network interface to disable the connection service.
administrate status, ATM VC connection identify, ADSL connection profile, and able to remove the
Subscriber and Network interface to disable the connection service.
Table 4-3
Modify and Remove the System Interface Data Connection
Use this command to modify the Subscriber interface administrate status.
#wizard modify status <user <u> | all> <on | off>
Use this command to modify the Subscriber ATM VC identify VPI/VCI values.
#wizard modify vpci <user <u> | all> vpi <vpi> vci <vci>
Use this command to modify the ADSL connection profile.
#wizard modify profile <user <u> | all> [down rrr] [up rrr] [downmin rrr] [upmin rrr] [fix | ra | rra] [fast |
interleaved] [adsl2 | adsl2plus | adsl2auto | adsl2plusauto]
interleaved] [adsl2 | adsl2plus | adsl2auto | adsl2plusauto]
Use this command to remove the Subscriber connection in all stratums of service layer.
#wizard delete user <user <u> | all>
Use this command to remove the Network connection in all stratums of service layer.
#wizard delete ethernet <1 | 2>
Parameters
Task
<user <u> | all>
Identify the specific user or entire device.
Type: Mandatory
Valid values: 1 ~ 48 and all
<on | off>
This parameter controls the ADSL interface to be enabled or disabled.
Type: Mandatory
Valid values: on, off
vpi <vpi>
Virtual Path Identifier. In order to set, the VPI value shall be the new VPI value. Also, the VPI and
VCI value cannot be modified along in one command.
VCI value cannot be modified along in one command.
Type: Mandatory
Valid values: 0 ~ 255
vci <vci>
Virtual Circuit Identifier. In order to set, the VCI value shall be the new VCI value. Also, the VPI and
VCI value cannot be modified along in one command.
VCI value cannot be modified along in one command.
Type: Mandatory
Valid values: 1 ~ 65535
[down rrr]
Configured downstream Maximum Transmit rate in kbps.
Type: Optional
[up rrr]
Configured upstream Maximum Transmit rate in kbps.
Type: Optional
[downmin rrr]
Configured downstream Minimum Transmit rate in kbps.
Type: Optional
[upmin rrr]
Configured upstream Minimum Transmit rate in kbps.
Type: Optional
[fix | ra | rra]
Defines what form of transmit rate adaptation is configured on this CO ADSL port in fixed, adapt at
startup, or adapt at runtime.
startup, or adapt at runtime.
Type: Mandatory
Default values: ra
[fast | interleaved]
This object is used to configure the ADSL physical line mode.
Type: Mandatory
Default values: interleaved
DAS3series IP-DSLAM
System Configuration Guide
System Configuration Guide