D-Link DAS-3224_revB User Manual
32
DAS3series LCT Operation Menus
Traps Configuration
The trap configuration allows you to administrate the specific ADSL trap report.
Figure 3-22
Traps Configuration Dialog
Table 3-15 describes the trap configuration field items.
Table 3-15
Configuring the Traps
Item
Description
Set traps pull down menu
There are four choices of traps: LinkUp/LinkDown, Initial Failure, Operate
State Change and Power Management.
LinkUp/LinkDown : Indicates whether linkUp/linkDown traps should be
generated for this interface.
Initial Failure : ATUC initialization failed.
Operate State Change : Enables/disables trap indicating a change in op state.
Power Management : PM state change trap used for ADSL2 / ADSL2plus PM
operation. This trap is not valid for ADSL mode.
State Change and Power Management.
LinkUp/LinkDown : Indicates whether linkUp/linkDown traps should be
generated for this interface.
Initial Failure : ATUC initialization failed.
Operate State Change : Enables/disables trap indicating a change in op state.
Power Management : PM state change trap used for ADSL2 / ADSL2plus PM
operation. This trap is not valid for ADSL mode.
DAS3series IP-DSLAM
System Configuration Guide