D-Link DAS-3216_revB Software Guide
22
錯誤! 尚未定義樣式。
Modify and Remove the Subscriber Interface Data Connection (Continuous)
Parameters
Task
[adsl2 | adsl2plus | adsl2auto |
adsl2plusauto]
adsl2plusauto]
Preferred standard compliance. Outcome is dependent upon standard support of the remote CPE.
Type: Mandatory
Default values: adsl2plus
<1 | 2>
Identify the Uplink Network interface port ID.
Type: Mandatory
Diagnosis the Subscriber Data Connection
The ‘wizard oam’ command provides the ATM OAM diagnosis to the ADSL Subscriber interface and
to verify connectivity at the AAL5 layer.
to verify connectivity at the AAL5 layer.
Table 4-4
Diagnosis the Subscriber Interface Data Connection
Use this command to generate the OAM cells and forwards them to the CPE element, which is responsible for
returning them to the generating system.
returning them to the generating system.
#wizard oam <user <u> | all>
Parameters
Task
<user <u> | all>
Identify the specific user or entire device.
Type: Mandatory
Valid values: 1 ~ 48 and all
Example 6
#wizard oam user 1
Send OAM to user 1..................[ok]
Monitoring the Subscriber Data Connection Status
The ‘wizard show’ command provides monitoring activity of Subscriber interface and running status.
Table 4-5
Monitoring the Subscriber Interface Data Connection
Use this command to monitoring the Subscriber ATM VC deploying parameters.
#wizard show deploy <user <u> | all>
Use this command to monitoring the Subscriber ADSL profile parameters.
#wizard show profile <user <u> | all>
Use this command to monitoring the Subscriber interface runtime data in ADSL transmission layer.
#wizard show status <user <u> | all>
Use this command to monitoring the Subscriber interface runtime data in Bridged transmission layer.
#wizard show stats <user <u> | all>
Parameters
Task
<user <u> | all>
Identify the specific user or entire device.
Type: Mandatory
Valid values: 1 ~ 48 and all
DAS3series IP-DSLAM
System Configuration Guide