D-Link DAS-3216_revB Software Guide
28
錯誤! 尚未定義樣式。
Monitoring the ADSL Connection Status
Use the command lists in Table 6-2 to retrieve the ADSL channel status once the specific ADSL port is
connected.
The ADSL connection monitoring is contains two channels, interleave and fast, respectively, identify
the channel interface as well as CO and CPE of the specify ADSL port interface. The ‘atuc’ define as
downstream direction, while ‘atur’ define as upstream direction.
connected.
The ADSL connection monitoring is contains two channels, interleave and fast, respectively, identify
the channel interface as well as CO and CPE of the specify ADSL port interface. The ‘atuc’ define as
downstream direction, while ‘atur’ define as upstream direction.
Table 6-2
Monitoring the ADSL Interface Connection Status
Use this command to monitoring the Downstream of ADSL channels connection status.
#get adsl atuc channel [ifname <name>]
Use this command to monitoring the Upstream of ADSL channels connection status.
#get adsl atur channel [ifname <name>]
Parameters
Task
[ifname <name>]
Identify the ADSL ATU-C or ATU-R channel interface name for which configuration is to be viewed.
Type: Optional (Get)
Valid values: dsli-1 ~ dsli-48 (Interleaved Channel), dslf-0 ~ dslf-47 (Fast Channel)
Example 8
#get adsl atuc channel ifname dsli-1
Ifname : dsli-1
Interleave Delay(ms): 1 Curr Tx Rate(bps) : 7584000
Prev Tx Rate(bps) : 0 Crc Block Length(byte) : 16116
Gs Curr Atm Status : OK GsSymbolsPerRsWord : 1
GsRsDepth : 4 GsRedundantBytesPerRsCode : 16
Example 9
#get adsl atur channel ifname dsli-1
Ifname : dsli-1
Interleave Delay(ms) : 8 Curr Tx Rate(bps) : 1088000
Prev Tx Rate(bps) : 0 Crc Block Length(byte) : 2312
Gs Curr Atm Status : OK GsSymbolsPerRsWord : 4
GsRsDepth : 8 GsRedundantBytesPerRsCode : 4
DAS3series IP-DSLAM
System Configuration Guide