D-Link DAS-3224_revB User Manual
Advance Management System Overview
7
Figure 2-3
AMS Hardware Development Diagram
AMS consists of a system server (AMS Server), workstations (AMS Client), gateways, switch hubs,
and laser printers to manage the NEs, the AMS hardware architecture is shown as Figure 2-3.
The AMS is designed using Client-Server architecture and able to be managed from single software
and hardware platform to have centralized network view of NEs.
2.5 AMS
Technical
Indices
y
The AMS supports more then 1,000 NEs and 700,000 xDSL Subscribers in single AMS Server
with minimum hardware specification, see this document “Chapter 2.6”.
with minimum hardware specification, see this document “Chapter 2.6”.
y
AMS Server can support 20 of AMS Client logging simultaneously.
y
The current alarm table can store 1,000,000 alarm records at most. The alarm records to be
stored in the alarm history table and the event table can be set by the user (the data will be
dumped when the alarm history table or the event table is full). A maximum of 1,000,000 history
alarms can be stored.
stored in the alarm history table and the event table can be set by the user (the data will be
dumped when the alarm history table or the event table is full). A maximum of 1,000,000 history
alarms can be stored.
y
The log database can save the log information generated during 3 months or more.
y
The AMS supports function to maintain the data consistence between the AMS Server and the
registered NEs in real-time.
registered NEs in real-time.
y
AMS Server has ability to keep the records of registered NEs parameter status update due to
power or equipment failures.
power or equipment failures.
2.6
System Hardware and Software Requirement
AMS has design in high stability and reliability platform, for perform fluent in management, the
minimum hardware specification require for handle around 1,000 NEs and 20 concurrent user access
from AMS Client are recommend in list below to optimal the performance. System itself have not
limitation on the number of elements under it management, the limit has only be restricted by the size
of the AMS hardware capabilities.
minimum hardware specification require for handle around 1,000 NEs and 20 concurrent user access
from AMS Client are recommend in list below to optimal the performance. System itself have not
limitation on the number of elements under it management, the limit has only be restricted by the size
of the AMS hardware capabilities.
The recommend hardware & OS for AMS Server:
y
y
Intel® Xeon™
2.8 GHz or higher
y
1 GB RAM
y
100 GB Hard disk
y
RAID 1 support
y
SCSI hard disk or SATA-I/II support
y
10/100/1000 Base-T Ethernet network card
y
Operating System – MS Windows 2000 Server / Windows 2003 Server
The recommend hardware & OS for AMS Client:
AMS
Software Specification and Introduction Guide
Software Specification and Introduction Guide