D-Link DAS-3224 User Manual

 

94

 

atmVCCAAL5EncapType is llc. In Mgmt mode, EoA 
interface cannot be created on the ATM VC and 
both Ethernet as well as non-ethernet packets on 
that ATM VC shall be received at the Control Plane.   
In DataAndMgmt mode, if EoA is created, then only 
non-ethernet packets on that ATM VC shall be re-
ceived at the Control Plane. However, if EoA is not 
created then all the packets on that ATM VC shall 
be received at the Control Plane. However, to 
configure ATM VC in DataAndMgmt mode, a good 
practice is to to create ATM VC in disable mode till 
EoA is created on it, to prevent flooding at Control 
Plane. In order to run STP, the mode has to be 
DataAndMgmt. If the mode is RawATM(4), ATM 
cells    are given to Control Plane. In this mode, EoA 
interface can ot be created on the ATM VC. If EoA 
interface is already created on the ATM VC, its 
mode cannot be changed to either Mgmt(2) or 
RawATM(4).  

RowStatus   

This defines the row-status of the interface entry   

VC Type   

This field specifies whether VC type is PVC or SVC.   

VC Topology   

This field specifies the VC connection topology 
type.  

 

Caution              The specified lower interface should exist. Please refer to the 

create atm port command.   

References   • ATM interface commands   

. 

          • ATM statistics commands   

. 

          • ATM OAM commands   

. 

          • ATM VC statistics commands.   

  get atm aal5 stats   

Description:    Use this command to get AAL5 VC statistics.   

Command Syntax:    get atm aal5 stats [ifname interface-name]   

Name   

Description   

ifname 
interface-name 

This parameter specifies the interface for which information 
is desired   
Type:  Get     -Optional 
Valid values :  aal5-0 - * 

Example    $ get atm aal5 stats ifname aal5-0 
 
Output               

Low  IfName  :  atm-0  VC         IfName  :  aal5-0 

VPI : 0 VCI : 1 

Tx Frames count :  100      Rx  Frames  count  :  85 

Tx Bytes count : 1535        Rx Bytes count : 1200 
CRC  Errors  count  :  0         Oversized  SDU  :  0

 

Output Fields 

FIELD   

Description   

VC IfName   

The name of the aal5 (aal5-0 etc) interface, for