D-Link DAS-3216 User Manual
D-Link DAS-3216 ADSL IP DSLAM
14
Hardware Installation
•
The DAS-3216 can be installed in a standard 19-inch rack, by using the
mounting brackets provided.
•
Mount the shelf on the rack using the large screws provided.
•
Follows the following procedures to connect and wire the system.
Safety Instruction
The following is the safety instructions for DAS-3216 before installation:
1. Read and follows all warning notices and instructions of this user manual.
2. The maximum recommended operating temperature for the DAS-3216 is
50ºC. Care must be taken to allow sufficient air circulation or space between
units when the DAS-3216 is installed inside a closed rack assembly and racks
should safely support the combined weight of all DAS-3216.
50ºC. Care must be taken to allow sufficient air circulation or space between
units when the DAS-3216 is installed inside a closed rack assembly and racks
should safely support the combined weight of all DAS-3216.
3. The connections and equipment that supply power to the DAS-3216 should
be capable of operating safely with the maximum power requirements of the
DAS-3216. In the event of a power overload, the supply circuits and supply
wiring should not become hazardous.
be capable of operating safely with the maximum power requirements of the
DAS-3216. In the event of a power overload, the supply circuits and supply
wiring should not become hazardous.
4. The AC adapter must plug in to the right supply voltage. Make sure that the
supplied AC voltage is correct and stable. If the input AC voltage is over 10%
lower than the standard may cause the DAS-3216 to malfunction.
supplied AC voltage is correct and stable. If the input AC voltage is over 10%
lower than the standard may cause the DAS-3216 to malfunction.
5. Do not allow anything to rest on the power cord of the AC adapter, and do not
locate the product where anyone can walk on the power cord.
locate the product where anyone can walk on the power cord.
6. Generally, when installed after the final configuration, the product must
comply with the applicable safety standards and regulatory requirements of the
country in which it is installed. If necessary, consult for technical support.
comply with the applicable safety standards and regulatory requirements of the
country in which it is installed. If necessary, consult for technical support.
7. A rare condition can create a voltage potential between the earth grounds of
two or more buildings. If products installed in separate building are
interconnected, the voltage potential can cause a hazardous condition. Consult
a qualified electrical consultant to determine whether or not this phenomenon
exists and, if necessary, implement corrective action before interconnecting the
products. If the equipment is to be used with telecommunications circuit, take
the following precautions:
two or more buildings. If products installed in separate building are
interconnected, the voltage potential can cause a hazardous condition. Consult
a qualified electrical consultant to determine whether or not this phenomenon
exists and, if necessary, implement corrective action before interconnecting the
products. If the equipment is to be used with telecommunications circuit, take
the following precautions:
•
Never install telephone wiring during a lightning storm.