D-Link DAS-3216 User Manual
D-Link DAS-3216 ADSL IP DSLAM
15
•
Never install telephone jacks in wet location unless the jack is specially
designed for wet location.
•
Never touch uninsulated telephone wires or terminals unless the telephone
line has been disconnected at the network interface.
•
Use caution when installing or modifying telephone lines (other than a cordless
telephone) during an electrical storm. There is a remote risk of electric shock
from lightning.
from lightning.
•
Do not use a telephone or other equipment connected to telephone lines to
report a gas leak in the vicinity of the leak.
DAS-3216 Rear Panel Connection
The following figure shows the rear panel connection of DAS-3216:
Figure 2-1 DAS-3216 Rear Panel Connection
Step 1 Ground the DAS-3216 by connecting a grounded wire
Step 2 Connect the ADSL line connector, a 50-pin centronic connector, of
DAS-3216 to CPE by using telco cable. Each line connector supports 8
ports of ADSL for Data path from MDF(Main Distribution Frame).
ports of ADSL for Data path from MDF(Main Distribution Frame).
Step 3 Connect the phone connector, a 50-pin centronic connector, of
DAS-3216 to Exchange/PBX by using telco cable. phone connector is an
optional module supporting Voice path to Exchange/PBX; it must be
along with Line Connector.
optional module supporting Voice path to Exchange/PBX; it must be
along with Line Connector.
Step 4 Connect the power adapter and plug it into an outlet.