D-Link DFL-1600 Software Guide
HighBuffers_Dynamic
Allocate the HighBuffers value dynamically. (Default: Yes)
HighBuffers
Number of packet buffers to allocate in addition to the ~200
initial buffers. (Default: 1024)
initial buffers. (Default: 1024)
LocalUndelivered
How to treat (allowed) packets to the Security Gateway that
do not match open ports (snmp, scp, netcon, etc). (Default:
DropLog)
do not match open ports (snmp, scp, netcon, etc). (Default:
DropLog)
MaxPipeUsers
Max number of concurrently tracked pipe users. (Default:
1024)
1024)
Reassembly_MaxConnections
Maximum percentage of the maximum allowed connections
that data reassembly may be performed on. (Default: 80)
that data reassembly may be performed on. (Default: 80)
Reassembly_MaxProcessingMem
Maximum percentage of device memory that may be used for
processing data on reassembled connections. (Default: 3)
processing data on reassembled connections. (Default: 3)
AVSW_Engine
Antivirus Software Engine Selection. (Default: Auto)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
only. There can only be one instance of this type.
3.55.17. MulticastSettings
Description
Advanced Multicast Settings.
Properties
AutoAddMulticastCoreRoute
Auto generate core route for "224.0.0.1-239.255.255.255".
(Default: Yes)
(Default: Yes)
IGMPBeforeRules
Allows IGMP traffic to enter the Security Gateway by de-
fault. (Default: Yes)
fault. (Default: Yes)
IGMPMaxGlobalRequestsPer-
Second
Second
Maximum number of requests per second. (Default: 1000)
IGMPMaxRequestsPerSecond
Maximum number of requests per interface per second.
(Default: 100)
(Default: 100)
IGMPReactToOwnQueries
The Security Gateway should always respond with Member
Reports, even to Queries originating from itself. (Default: No)
Reports, even to Queries originating from itself. (Default: No)
IGMPRobustnessVariable
IGMP is robust to 'value' - 1 packet losses. (Default: 2)
IGMPQueryInterval
The interval (ms) between general queries sent by the Secur-
ity Gateway. (Default: 125000)
ity Gateway. (Default: 125000)
IGMPQueryResponseInterval
The maximum time (ms) until a host/client has to send an an-
swer to a query. (Default: 10000)
swer to a query. (Default: 10000)
IGMPStartupQueryInterval
The general query interval (ms) to use during the startup
phase (default: 1/4 of the 'IGMP Query Interval' parameter.
(Default: 30000)
phase (default: 1/4 of the 'IGMP Query Interval' parameter.
(Default: 30000)
3.55.17. MulticastSettings
Chapter 3. Configuration Reference
197