D-Link DFL-1600 Software Guide
IGMPStartupQueryCount
The number of startup queries to send during the startup
phase. (Default: 2)
phase. (Default: 2)
IGMPLastMemberQueryInter-
val
val
The maximum time (ms) until a host/client has to send an an-
swer to a group and group-and-source specific query.
(Default: 5000)
swer to a group and group-and-source specific query.
(Default: 5000)
IGMPUnsolicatedReportInterval
The time between repetitions (ms) of an initial membership
report. (Default: 1000)
report. (Default: 1000)
IGMPRouterVersion
Multiple IGMP querying routers on a network must use the
same IGMP version. (Default: IGMPv3)
same IGMP version. (Default: IGMPv3)
IGMPLowestCompatibleVersion
Lowest IGMP compatibility mode. (Default: IGMPv1)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
only. There can only be one instance of this type.
3.55.18. RemoteMgmtSettings
Description
Setup and configure methods and permissions for remote management of this system.
Properties
NetconBiDirTimeout
Specifies the amount of seconds to wait for the administrator
to log in before reverting to the previous configuration.
(Default: 30)
to log in before reverting to the previous configuration.
(Default: 30)
WebUIBeforeRules
Enable HTTP(S) traffic to the security gateway regardless of
configured IP Rules. (Default: Yes)
configured IP Rules. (Default: Yes)
WWWSrv_HTTPPort
Specifies the HTTP port for the web user interface. (Default:
80)
80)
WWWSrv_HTTPSPort
Specifies the HTTP(S) port for the web user interface.
(Default: 443)
(Default: 443)
SSHBeforeRules
Enable SSH traffic to the security gateway regardless of con-
figured IP Rules. (Default: Yes)
figured IP Rules. (Default: Yes)
HTTPSCertificate
Specifies which certificate to use for HTTPS traffic. Only
RSA certificates are supported. (Optional)
RSA certificates are supported. (Optional)
NetconBeforeRules
Enable netcon traffic to the security gateway regardless of
configured IP Rules. (Default: Yes)
configured IP Rules. (Default: Yes)
NetConMaxChannels
The maximum number of concurrent Netcon channels. The
Netcon channels consists of the following: console, realtime
logger, stat poll or send/receive file context. (Default: 18)
Netcon channels consists of the following: console, realtime
logger, stat poll or send/receive file context. (Default: 18)
SNMPBeforeRules
Enable SNMP traffic to the security gateway regardless of
configured IP Rules. (Default: Yes)
configured IP Rules. (Default: Yes)
SNMPRequestLimit
Maximum number of SNMP packets that will be processed
3.55.18. RemoteMgmtSettings
Chapter 3. Configuration Reference
198