D-Link DAS-3224DC_revC Leaflet
24
Installing the DAS3 Series
Connecting the RJ-21 Subscriber Line Interface
DAS3 Series RJ-21 Telco Cable Connecting
Complete the following steps to connect the RJ-21 connector
Figure 4-4
Rear Panel RJ-21 Connector Cabling for DAS3 Series
Step 1
Attach the RJ-21 champ cable to connect the DAS3 Series to the Subscriber MDF
corresponding DSL bus sockets.
corresponding DSL bus sockets.
Step 2
Attach the RJ-21 champ cable to connect the DAS3 Series to the PSTN MDF where the
socket with “POTS” labels.
socket with “POTS” labels.
Step 2
Screw tight the RJ-21 champ with connect socket, make sure the connection is tight enough
due to cabling.
due to cabling.
Step 3
Repeat Step 1 through Step 2 for each RJ-21 socket as necessary.
DAS3 Series IP-DSLAM
System Installation Guide