Canon PowerShot Pro 90 IS User Guide
Preparing the Camera
21
Installing the Battery Pack
Install Battery Pack BP-511 (supplied) into the camera as follows. Use a household
power source to power the camera for extended periods (p. 23).
power source to power the camera for extended periods (p. 23).
1
Turn the main dial to
.
2
Slide the battery cover lock in the
direction of the arrow and lift to open
it.
direction of the arrow and lift to open
it.
3
Press the battery lock in the direction of
the arrow while inserting the battery
pack, then close the battery cover.
the arrow while inserting the battery
pack, then close the battery cover.
• Insert the battery pack until it locks into place.
4
Close the battery cover.
To Remove the Battery Pack
Twist the battery lock in the direction of the
arrow and pull the battery pack out.
arrow and pull the battery pack out.
Terminals
Battery
Lock
Lock
• Charge the battery pack before using it the first time (p. 19).
• The flashing green indicator signals that the CF card is being written to, read, or
• The flashing green indicator signals that the CF card is being written to, read, or
erased. Never open the battery cover or remove the battery while it is flashing.
• Remove the battery pack when the camera is not in use.