Canon PowerShot Pro 90 IS User Guide

42   

Shooting - Letting the Camera Select Settings

The image will show in the LCD monitor for approximately 2 seconds immediately
after shooting even if the shutter button is released. You can also view the image
with the following procedures.

Keeping the Shutter Button Pressed
The image will continue to display in the LCD monitor or viewfinder as long as the
shutter button is kept fully depressed after shooting.

Pressing the Set Button
If you press the Set button while the image is displayed in the LCD monitor or
viewfinder, it will continue to display even after the shutter button is released. Press
the shutter button halfway again to stop displaying it.

• There is a shortcut for erasing the image while it is displayed (p. 9).

The display of the image in the LCD monitor or viewfinder after shooting can be
set to Off or the duration changed to 10 seconds.

In the [

 (Rec.)] menu, select [Review].

• See Selecting Menus and Settings (p. 38).

Select a Review setting and press the
Menu button.

• With the [Off] option, the image will not

automatically display. However, you can view it
if you keep the shutter button held down.

• With the [2 sec.] or [10 sec.] options, the image

automatically displays for the set duration even
if the shutter button is released.

• You can display the image longer than the 2-

or 10-second duration by keeping the shutter
button depressed or by pressing the Set button
while it is displayed.

• Another picture can be taken even while the

last is displayed.