Canon PowerShot Pro 90 IS User Guide
44
Shooting - Letting the Camera Select Settings
Using the Built-In Flash
Use the built-in flash according to the guidelines below.
* No icon appears in the display panel in Auto mode.
1
Press the button to switch between
flash modes.
flash modes.
• The selected flash mode will show in the
display panel. It will also appear in the LCD
monitor or viewfinder if it is on.
monitor or viewfinder if it is on.
2
Shoot the image.
• When the flash is set to fire, it will
automatically pop up when the shutter button
is pressed halfway and a red will appear in
the LCD monitor or viewfinder.
is pressed halfway and a red will appear in
the LCD monitor or viewfinder.
• Shooting procedures are described in steps 6-8
in the Quick Start section (p. 9).
• To close the flash, press it down with your
fingers.
Built-in Flash Settings
The flash cannot be used with some shooting modes.
The flash cannot be used with some shooting modes.
(Auto)
(Red-eye reduction,
Auto)
(Red-eye reduction,
Flash on)
(Flash on)
(Flash off)
●
●*
-
-
●
-
-
-
-
●*
-
-
●
●
●*
-
-
●
●
●*
-
-
●
●
●*
-
-
●
●
●*
-
-
-
▲
▲*
●*
●
●
●
●
●
●*
●
●
●
●
●
●
●
●*
●
●*
●
●
●
●
*
●
●
●
●
(Auto)*
(Red-eye reduction, Auto)
(Red-eye reduction, Flash on)
(Flash on)
(Flash off)
The flash fires automatically as required by the lighting level.
The red-eye reduction lamp always fires but the flash only fires as
required by the lighting level.
required by the lighting level.
The red-eye reduction lamp and the flash always fire.
The flash always fires.
The flash does not fire.
* Default setting.
●
Setting selection is possible.
▲
Setting can only be selected for the first image.
- Setting selection is not possible.